An RF (radio-frequency) module is (usually) a small electronic device used to transmit and/or receive radio signals between two devices. In an embedded system, it is often desirable to communicate with another device wirelessly.

  • Fury – 60 GHz Switchable Beam Radar
    • Fury – 60 GHz Switchable Beam Radar
    • Fury – 60 GHz Switchable Beam Radar

    • Fury is a new generation, Texas Instruments (TI)-based System on Chip (SoC) module to take your next 60 GHz radar design to market quickly. Equipped with TI’s IWR6843 SoC (sporting an ARM Cortex M4 32‐bit processor core with a C674x DSP accelerator), Fury has plenty of processing power to support a plethora of advanced Digital Signal Processing (DSP) algorithms for…
  • iScan Prizm 1 – 77 GHz Digital Beam Antenna Module
    • iScan Prizm 1 – 77 GHz Digital Beam Antenna Module
    • iScan Prizm 1 – 77 GHz Digital Beam Antenna Module

    • iScan Prizm 1 sport’s Infineon’s 77 GHz RXS8160 MMIC chip to enable a multitude of radar applications such as Advanced Driver Assistance System (ADAS) capabilities like emergency braking, adaptive cruise control, and collision avoidance. This module features on-board memory, processing, data recording, Ethernet, 3x TX, 4x RX, and much more. iScan Prizm 1 is compatible with CAES APD’s iScan Edge…
  • AmpiFly – Wi-Fi Range Extender and Standoff Repeater
    • AmpiFly – Wi-Fi Range Extender and Standoff Repeater
    • AmpiFly – Wi-Fi Range Extender and Standoff Repeater

    • The AmpiFly Wi-Fi range extender is a standoff repeater that extends the range of a Wi-Fi signal up to 800 m. It enhances many other applications as well, including ATVs, beacons, Bluetooth, AMSAT, wireless systems, dish feed, and satellites. LEDs equipped on the board display the power status. Each Range Extender can broadcast as a hotspot, allowing up to five…
  • Kromium 1 – 24 GHz Switchable Beam Radar
    • Kromium 1 – 24 GHz Switchable Beam Radar
    • Kromium 1 – 24 GHz Switchable Beam Radar

    • Kromium 1 will take your next 24 GHz radar design to market quickly and easily. The built‐in patch antenna includes three switchable transmit and receive beams, with a total Field of View (FOV) of 100°. Equipped with Infineon’s BGT24MTR11 transceiver and XMC microcontroller, and optimized for energy efficiency with an ARM Cortex – M4, 32‐bit processor core, Kromium 1 has…
  • Kromium 2 – 24 GHz Fixed Beam Radar
    • Kromium 2 – 24 GHz Fixed Beam Radar
    • Kromium 2 – 24 GHz Fixed Beam Radar

    • Kromium 2 can take your next 24 GHz radar design to market quickly and easily. Packed with extensive capability, Kromium 2 outperforms its competition in tasks, such as range, speed and RCS measurements, target tracking, collision avoidance, occupancy sensing and much more. Kromium 2 has a total Field of View (FOV) of ±36.5° AZ, ±8° EL. Equipped with Infineon’s BGT24MTR11…
  • 3DR Thunder I – 2-channel, 16-bit, 250 MHz Digital-to-Analog Converter Board
  • 3DR Thunder II – 8-channel, 16-bit, 11.5 GSPS Digital-to-Analog Converter
    • 3DR Thunder II – 8-channel, 16-bit, 11.5 GSPS Digital-to-Analog Converter
    • 3DR Thunder II – 8-channel, 16-bit, 11.5 GSPS Digital-to-Analog Converter

    • The 3DR-A10-DAC-12.6 GSPS is an 8-channel, 16-bit, 12.5 GHz digital-to-analog converter board used to convert digital signals into analog waveforms. The on-board Intel Arria 10 FPGA (10AX115U3F45E2SG) can be used to digitally generate waveforms or playback pre-stored samples. As with all 3DR computing modules, the 3DR-A10-DAC-12.6 GSPS supports three-dimensional connectivity, allowing the user to stack and/or tile modules to address…
  • 3DR Lightning I – 4-channel, 12-bit, 10 GSPS Analog-to-Digital Converter
    • 3DR Lightning I – 4-channel, 12-bit, 10 GSPS Analog-to-Digital Converter
    • 3DR Lightning I – 4-channel, 12-bit, 10 GSPS Analog-to-Digital Converter

    • The 3DR-FPGA-ADC-10GSPS is a 4-channel, 12-bit, 10 GSPS analog-to-digital converter board for digitizing and processing analog inputs. High performance, low latency processing can be implemented via the on-board Altera Arria 10 FPGA (10AX115U3F45I2SG). As with all 3DR computing modules, the 3DR-FPGA-ADC-10GSPS supports three-dimensional connectivity, allowing the user to stack and/or tile modules to address a wide variety of processing, I/O,…
  • 3DR Lightning II – 8-channel, 14-bit, 3 GSPS Analog-to-Digital Converter
    • 3DR Lightning II – 8-channel, 14-bit, 3 GSPS Analog-to-Digital Converter
    • 3DR Lightning II – 8-channel, 14-bit, 3 GSPS Analog-to-Digital Converter

    •   The 3DR-A10-ADC-3GSPS, known as Lightning II, is an 8-channel, 14-bit, 3 GSPS analog-to-digital converter board for digitizing and processing analog inputs. High performance, low latency processing can be implemented via the on-board Altera Arria 10 FPGA (10AX115U2F45I2SG). As with all 3DR computing modules, Lightning II supports 3-dimensional connectivity, allowing the user to stack and/or tile modules to address a…
  • 3DR Lightning III – 8-Channel, 16-Bit, 250 MSPS Analog-to-Digital Converter
    • 3DR Lightning III – 8-Channel, 16-Bit, 250 MSPS Analog-to-Digital Converter
    • 3DR Lightning III – 8-Channel, 16-Bit, 250 MSPS Analog-to-Digital Converter

    • The 3DR-A10-ADC-250MSPS, known as Lightning III, is an 8-channel, 16-bit, 250 MSPS analog-to-digital converter board for digitizing and processing analog inputs. High performance, low latency processing can be implemented via the on-board Altera Arria 10 FPGA (10AX115U2F45I2SG). As with all 3DR computing modules, Lightning III supports three-dimensional connectivity, allowing the user to stack and/or tile modules to address a wide…
  • 3DR Lightning IV – 10-Channel, 16-Bit, 160 MHz Analog-to-Digital Converter
    • 3DR Lightning IV – 10-Channel, 16-Bit, 160 MHz Analog-to-Digital Converter
    • 3DR Lightning IV – 10-Channel, 16-Bit, 160 MHz Analog-to-Digital Converter

    • The 3DR-V6-ADC-160MSPS, known as Lightning IV, is a 10-channel, 16-bit, 160 MHz analog-to-digital converter board for digitizing and processing analog inputs. High performance, low latency processing can be implemented via the onboard VIRTEX–6 FPGA (XC6VLX240T). As with all 3DR computing modules, Lightning IV supports three-dimensional connectivity, allowing the user to stack and/or tile modules to address a wide variety of…
  • Cirrus RF-DC – High Power C-Band Down Converter
    • Cirrus RF-DC – High Power C-Band Down Converter
    • Cirrus RF-DC – High Power C-Band Down Converter

    • Cirrus RF-DC is a high power C-band down converter applicable for commercial and military, communications, EW/SIGINT and radar. Cirrus's benefits include low noise figure, high dynamic range, precision gain control, low power consumption and many more!
  • Cirrus RF-LO-S – C-Band Synthesizer
    • Cirrus RF-LO-S – C-Band Synthesizer
    • Cirrus RF-LO-S – C-Band Synthesizer

    • Cirrus RF-LO-S is a C-band synthesizer applicable for commercial and military, communications, EW/SIGINT and radar. Its benefits include low power consumption, small, ruggedized construction, internal 100 MHz OCXO with external outputs, ultra low phase noise fixed frequency outputs and more!
  • Cirrus RF-UC – High Power C-Band Up-Converter
    • Cirrus RF-UC – High Power C-Band Up-Converter
    • Cirrus RF-UC – High Power C-Band Up-Converter

    • Cirrus RF-UC is a high power c-band up-converter applicable for commercial and military, communications, EW/SIGINT and radar. Its benefits include precision gain control, low power consumption, small, ruggedized construction, H=high output power up to 20 dbm, 40 MHz IF input to c-band up-conversion and more!
  • Rover RCRF – Fully ReConfigurable RF Board with Design, Simulation and Synthesis Software Using NI AWRs VSS and Microwave Office